12V Centre Console Piggyback Power Harness – Ford Ranger Super Duty

Add accessory power without cutting your factory wiring

The DUTYTEK 12V Centre Console Piggyback Power Harness provides a simple, OEM-style power connection for installing low-current 12V accessories in your Ranger Super Duty, while remaining compatible with Next-Gen Ford Ranger, Ranger Raptor and Everest models.

The harness connects between the vehicle’s original centre-console wiring plug and the factory 12V socket. Its plug-and-play Y-adapter design retains operation of the original socket while providing accessible positive and negative wires for your accessory installation.

It is ideal for powering compatible low-current accessories such as:

• UHF radios
• Dash cameras
• Switched LED lighting
• Small electronic accessories
• Other suitable low-current 12V equipment

Key features

• Plug-and-play connection behind the centre-console 12V socket
• No cutting, splicing or soldering into the factory wiring harness
• Retains the original centre-console 12V socket
• Provides both positive and negative accessory connections
• Approximately 25 cm of bare-ended wire for custom installation
• Neat, removable and OEM-style installation
• Helps avoid permanent modification of the vehicle’s original wiring
• Suitable for DIY installations and professional accessory fit-outs

How it installs

Remove or access the centre-console panel and disconnect the factory plug from the rear of the 12V socket. Connect the DUTYTEK piggyback harness between the original vehicle connector and the socket, then terminate the supplied positive and negative wires according to your accessory’s installation requirements.

Vehicle compatibility

Designed for Ranger Super Duty models fitted with the matching factory centre-console 12V socket connection.

Also compatible with Next-Gen Ford Ranger, Ranger Raptor and Everest models using the same connector type.

Please compare the vehicle connector with the product images before ordering, particularly where the vehicle has a different console configuration or market specification.

Important installation information

This harness is intended as an accessory power connection for suitable low-current equipment. Always check the current draw and installation requirements of the accessory being connected.

An appropriately rated inline fuse should be installed for the connected accessory unless suitable circuit protection is already incorporated into the accessory wiring. High-current equipment should be powered through an appropriately rated relay and dedicated fused power supply rather than directly through this harness.

Professional installation is recommended if you are unsure about vehicle wiring, electrical load limits or circuit protection.

What’s included

• 1 × 12V centre-console socket piggyback power harness